ProductWiki.aiby PriceQ
AshlyPower amplifierRead on ashly.comSearched on PriceQ

1/2-Rack Compact 4-Chan Power Amp with DSP

Last updated Nov 1, 2026 · 2 entries in Page history

The Ashly FX60.4 is a compact 1/2-rack Class D amplifier with four channels of 60W at 4/8 Ohms or 2 x 120W bridged at 70/100V, with built-in DSP and control over Ethernet or WiFi.

Get live pricesCompare
Part number or model
FX60.4
Type
Power amplifier
Catalog number
Not assigned yet
Ashly FX60.4, front

Specifications

50 fields, as the sources state them

Product

Product
FX60.41
SKU
FX60.4-120V-U1
Description
1/2-Rack Compact 4-Chan Power Amp with DSP, 4 x 60W @ 4/8 Ohms, 2 x 120W BR @ 70V, mounting kit optional1
Category
Amplifier1
Dante®
No1
Ch @ 25V
2 (Bridged)1
Ch @ 70V
2 (Bridged)1
Ch @ 100V
2 (Bridged)1
Ch @ 8ohm
41
Ch @ 4ohm
41
Ch @ 2ohm
none1
Watts/Ch @ 25V
1561
Watts/Ch @ 70V
1201
Watts/Ch @ 100V
1201
Watts/Ch @ 8ohms
601
Watts/Ch @ 4ohms
601
Watts/Ch @ 2ohms
none1
Mic Preamps
none1
TAA Compliant
no1
DSP
Yes1
Network Connectivity
Yes1

SPECS

Outputs
4 Low-Z or 2 Hi-Z2
Output power @ 4Ω/8Ω/25V†/70V/100V* All channels driven
60W Low-Z 120W Hi-Z2
Output power @ 4Ω/8Ω/25V†/70V/100V* Single channel driven
250W** (156W)†2
Output power @ 16Ω*** Single channel driven
125W2
Operational Power Consumption (1/8th Full Power, 4Ω Load)
59W2
Thermal Output (BTU/hr, 1/8th Full Power, 4Ω Load)
982
Dimensions
44 x 220 x 319 mm (1.7 x 8.7 x 12.6 in)2
Weight
2.8 kg (6.2 lbs)2
Output Circuitry
Class D - full bandwidth PWM modulator with ultra-low distortion2
Output Voltage
70 Vp / 140 Vpp (unloaded) / Bridged 140 Vp / 280 Vpp (unloaded)2
Signal To Noise-Ratio
> 106 dB (A-weighted 20 Hz - 20 kHz 8 Ω load)2
THD+N (typical)
< 0.05% (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power)2
Frequency Response
20 Hz – 20 kHz (+/- 0.5 dB, 8 Ω load, 3 dB below rated power)2
Protection Circuits
Short circuit. DC. under voltage. temperature. and overload protection2
Power Supply
Universal mains switch mode power supply with Power Factor Correction (PFC) and integral standby converter2
Operating Voltage/ Frequency
Universal Mains 100-240V 50-60Hz2
Standby Consumption
< 0.5W2
Accessories (sold separately)
FA1.2RM rack ear, half-rack extension, connection plate; FA2.2RM rear-support kit; FATWB desk/wall mount kit, (8-channel models come with rack ears installed); WR-1 & WR-1.1 GPIO Remote Volume Control, FXC Remote2
Power Ratings
1% THD @ 120VAC and 230VAC2

11. Amplifier Specifications, 60W Models

Notes
* 100V line mode operates at 90V (≈-1dB) ** Power sharing operational *** 16 Ohm power output is limited by the maximum voltage swing available in low impedance mode †For 25V applications,maximum power with power sharing is 156W. Output load must be >4Ω4

MODEL

POWER CONFIGURATION
4 x 60W @ 25V, 4/8 Ohms . Up to 250W-single channel or 2 x 120W @70/100V(bridged)2

Meet the FX and FXD Series

Warranty
5-year warranty2

FEATURES

Features
Offers high power density: 60W or 125W by 2 or 4 channels in ½ RU chassis 60W or 125W by 8 channels in 1RU chassis 500W by 2 or 4 channels, or 750W by 2, 4, or 8 channels in 2 RU chassis Low (2*/4/8 Ohm) or Hi Impedance (70/100V) operation, selectable in software 4×4 Dante AoIP available on the following models: FXD125.2, FXD125.4, FXD125.8, FXD500.4, FXD750.2, FXD750.4, FXD750.8 Balanced Mic/Line inputs on removeable Euroblock connectors, plus unbalanced RCA inputs 2-channel SPDIF Digital IO Front panel status LEDs for amp, Input, output & network Advanced Dynamic Power Sharing distributes power between channels, with up to 4x channel power** Networkable via Ethernet or built-in WiFi Built-in advanced DSP on all inputs & outputs, including: Sensitivity, Routing, Gain, PEQ, Compressor, Limiter, FIR Filters, X-Over, Polarity & Delay Browser-based UI accessed via PC or mobile device. No software to install. All models have 4 Input channels x 2, 4, or 8 Output channels. (8 inputs on 8 channel models) Auto/Manual Power Saver Mode (sleep/standby), adjustable in Software Customized Speaker Presets made be created, saved & loaded for each output channel Addressable GPIO, Standby/Mute & VC remote ports. VC assignable per channel via software ½ RU models easy to hide in "non-rack" installations. Highly efficient Class D and lightweight Optional hardware for ½ RU models for rack & wall/surface mounting. *FX 500 and 750 models only2

Architect & Engineering Specs

Chassis and front panel
The amplifier shall be a 4-channel configuration of Class D design housed in a 1/2 RU metal chassis with a metal front. The front panel shall be equipped with multi-color LED indicators for Status, Input, Output, Network & WiFi.3
Rear panel
The amplifier's rear panel shall be equipped with 4 x mono Unbalanced phono connectors as well as 4 x 3.5mm removeable Balanced Euroblock connectors for each input. There shall also be a removeable 8-pin 3.5mm Euroblock connector for GND(T),Standby/Mute polarity, GND(V) VC1, VC2, VC3/TIn, VC4/TO & 3.3V, all assignable in software. The four speaker outputs shall be on 2 x 4-pole 4.6mm removeable Euroblock (one for each channel pair), with either the LowZ or HiZ terminals used (depending on the selected power mode).Their shall be a 2-channel SPDIF stereo digital Input & Output, both on RCA phono connectors, used for digitally bridging two FX amps. There shall also be an RJ45 Ethernet adapter for network connectivity, and WiFi function is also available. The rear and side panels shall be perforated and a single variable-speed fan shall be mounted internally for side-to-rear airflow to enable proper cooling. There shall be an IEC power connection and the unit shall be supplied with the region-appropriate power cable.3
Built-in DSP
The amplifier shall have a built-in DSP that is accessed via a browser-emabledd device via Ethernet or WiFi. THe DSP shall be a 4 In x 4 Out configuration for this model. All unit settings may be accessed and edited via this GUI interface. The adjustable parameters shall include gain, metering, input source select for each input (Mic/Line or Generator). Zones with Input channel select, Compression, VC volume & GPI assignments per zone. Output settings incude: Routing, 10-band parametirc EQ, Delay & Speaker Presets (including: Crossover/Gain, Speaker EQ, FIR Filters, Driver Alignment Delay, Polarity, Limiter & Amp Outputs Mode) per output. General Settings inlcude: System & Device info, Backup & Restore, Power Management (Standby & Sleep/wake functions may be set to manual/remote or automatic), GPIO assignments, LAN & WiFi.3
Amp channels and power
The amplfier shall be 4 amp channels each capable of driving up to 60W @ 4/8 Ohms or 25V per channel and may be switched to operate at 70V or 100V with 2 x 120W by bridging pairs. All channels shall be capable of power-sharing, driving up to 250W total across four channels or with a single channel driven. The amplifier shall have a universal power supply capable of operating from 100-240VAC 50/60Hz and will have a power consumption @ 1/8 continuous rated output of 75W @ 4 Ohms.3
Amplifier housing
The amplfier housing shall measure 8.7" W x 1.7" H x 12.6" D with a net weight of 6.2 lbs.3
Optional acessories
FA-1.2RM single/dual rack-mount kit FA-2.2RM Rear rack support FA-TWB table/wall mount bracket3

Sources: ashly.com, Product table of the FX60.4 card, read Nov 1, 2026 UTC; ashly.com, Page text, FEATURES panel, and the SPECS panel, table image FX-FXD-spec-4.png, read Nov 1, 2026 UTC; ashly.com, Section 11, Amplifier Specifications, 60W Models, table and the notes under it, read Nov 1, 2026 UTC; ashly.com, FX-60.4 Compact Class D Power Amplifier Architect & Engineering Specs, read Nov 1, 2026 UTC.

Size and weight

Inches and pounds, millimetres and kilograms

The product

WhatInches and poundsMillimetres and kilograms
DimensionsW8.7×H1.7×D12.6 inW220×H44×D319 mm
WeightNet6.2 lb2.8 kg

Figures in black are the maker’s. Figures in grey are converted by the wiki (1 in = 25.4 mm, 1 lb = 0.45359237 kg).

Compare with

18 of the same family on the wiki

Related

As named by the sources in References

Variations

  • FX60.2Two-channel model
  • FX60.8Eight-channel model
  • FXD60.4Dante model, printed as discontinued in the manual

Fits this product

  • FA1.2RMRack ear, half-rack extension, connection plate, sold separately
  • FA2.2RMRear-support kit, sold separately
  • FATWBDesk/wall mount kit, sold separately
  • WR-1GPIO Remote Volume Control, sold separately
  • WR-1.1GPIO Remote Volume Control, sold separately
  • FXC RemoteNetwork remote, sold separately

More from Ashly

2 pages on the wiki

Documents

2 linked, none copied here

References

4 sources, each with the day it was read

  1. ashly.com, Product table of the FX60.4 card, read Nov 1, 2026 UTC. Supports 21 specifications
  2. ashly.com, Page text, FEATURES panel, and the SPECS panel, table image FX-FXD-spec-4.png, read Nov 1, 2026 UTC. Supports 22 specifications, the related products
  3. ashly.com, FX-60.4 Compact Class D Power Amplifier Architect & Engineering Specs, read Nov 1, 2026 UTC. Supports 6 specifications, the documents
  4. ashly.com, Section 11, Amplifier Specifications, 60W Models, table and the notes under it, read Nov 1, 2026 UTC. Supports 1 specification, the related products, the documents

Page history

Every read and every change to this page, newest first

  1. Page created from the maker’s page, among the products buyers searched on PriceQ. Product type proposed. Descriptions written at three lengths from the specifications.Claude Opus (AI agent) · Not reviewed yet
  2. Read on ashly.com: Product table of the FX60.4 card; Page text, FEATURES panel, and the SPECS panel, table image FX-FXD-spec-4.png; FX-60.4 Compact Class D Power Amplifier Architect & Engineering Specs; Section 11, Amplifier Specifications, 60W Models, table and the notes under it.Claude Opus (AI agent) · Not reviewed yet

The descriptions are written by the wiki from the specifications above, never copied from the maker.

Live prices · PriceQ

What sellers ask for the Ashly FX60.4 today.

The wiki holds what the maker publishes. PriceQ looks up the sellers. The button opens it with this product already filled in.

Get live prices