GLOBALCOM®.IP Touch Screen Digital Communication Station with Handheld Mic
Last updated Nov 2, 2026 · 2 entries in Page history
This desktop communication station features a 7-inch programmable touch screen and includes a handheld microphone. It connects via redundant Ethernet ports and is PoE powered for use with GLOBALCOM announcement systems.
As the source prints itDesktop Dimensions11.82" W x 6.19" H x 6.08" D (300 mm x 157 mm x 154 mm)Press to see it in the sheet ↓
As the source prints itDesktop Dimensions11.82" W x 6.19" H x 6.08" D (300 mm x 157 mm x 154 mm)Press to see it in the sheet ↓
As the source prints itDesktop Dimensions11.82" W x 6.19" H x 6.08" D (300 mm x 157 mm x 154 mm)Press to see it in the sheet ↓
As the source prints itScreen Size7"Press to see it in the sheet ↓
- Part number or model
- IPCSDTOUCH-H
- Catalog number
- Not assigned yet
- Searched on PriceQ as
- “Atlas Sound IPCSDTOUCH-H”
Specifications
42 fields, as the sources state them
DESCRIPTION
- DESCRIPTION
- The IPCSDTOUCH digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems. Each model utilizes an electret condenser cartridge that is positioned in the housing such that its frequency response is enhanced. The microphone element location provides the mechanism for good acoustical coupling to provide a full-bodied, highly intelligible voice signal. The IPSCDTOUCH-H includes a handheld microphone. The IPCSDTOUCH has an auxiliary line level audio input which may be used as a (local) background music source. The station also has a line level audio output which may be used as a zone out. The IPCSDTOUCH is a network appliance in which each station may obtain its IP address automatically or be assigned a unique IP address which simplifies installation and configuration.1
Features
- Features
- Dante Enabled Fully Programmable Touch Screen User Interface Provides unlimited selection and initiation of announcements and messages in a GLOBALCOM®.IP System Supervision of the Microphone Element Handheld, Gooseneck, Surface (Flat) or Desktop (Free Standing) Versions Redundant Ethernet Ports PoE Powered1
Front Panel Features
- Front Panel Features
- Fully Programmable touch screen User Interface. Alarm Indicator LED (red) Fault Indicator LED (yellow) Busy Indicator LED (yellow) Ready Indicator LED (green)1
Handheld Microphones
- Handheld Microphones
- The handheld microphone assembly contains an omnidirectional electret condenser microphone cartridge integrated with a microphone preamplifier and an audio line driver. The microphone element and preamplifier are mounted in a teardrop shaped molded black textured Cyclolac™ housing. The use of an omnidirectional element eliminates the proximity effect which creates a boomy sound when a user speaks close to a microphone. It utilizes a magnet for attachment to the microphone station base assembly and is supplied with a circular coiled cable which is built into the housing assembly. A strain relief is built into the housing end of the cable and locks into the housing. The terminations at each end are molded, 6 wire, RJ25 connectors which provide extra strength and resistance to failure by pull-out. The cartridge features include a highly efficient electrical specification, pressure type operating principle, low impedance (2.2 kΩ), and high reliability under adverse shock, vibration and other environmental conditions.1
Gooseneck Microphone
- Gooseneck Microphone
- The gooseneck microphone contains an omnidirectional electret condenser microphone cartridge integrated with a microphone preamplifier and an audio line driver. The microphone element is mounted in the metal windscreen portion of the gooseneck. The preamplifier and line driver are on a PC board mounted inside the base of the gooseneck on an XLR connector. The microphone assembly is a 12” gooseneck with a hard metal windscreen at the top and a 5-pin XLR connector in the base for mounting.1
SPECIFICATIONS
- Warranty Period
- 36 months from date of purchase1
General Description
- General Description
- The IPCSDTouch digital communications station is a fully programmable touch screen user interface device for initiating audio / visual announcements, messages, and pages with the GLOBALCOM® Series Announcement Control Systems. Each model utilizes an electret condenser microphone cartridge that is positioned in the housing such that its frequency response is enhanced. The microphone element location provides the mechanism for good acoustical coupling to provide a full-bodied, highly intelligible voice signal. The IPCSDTouch has an auxiliary line level audio input which may be used as a (local) background music source. The station also has a line level audio output which may be used as a zone out. The IPCSDTouch is a network appliance in which each station may obtain its IP address automatically or be assigned a unique IP address which simplifies installation and configuration.2
IPCSDTouch-H (Handheld Microphone Version)
- IPCSDTouch-H (Handheld Microphone Version)
- The handheld microphone assembly contains an omnidirectional electret condenser microphone cartridge integrated with a microphone preamplifier and an audio line driver. The microphone element and preamplifier are mounted in a teardrop shaped molded black textured Cyclolac™ housing. The use of an omnidirectional element eliminates the proximity effect which creates a boomy sound when a user speaks close to a microphone. The electret condenser microphone cartridge consists of a high voltage internal membrane, metal electrode and a Field Effect Transistor (FET). The requirement for a high voltage bias is not necessary as with ordinary condenser microphone elements. The cartridge features include a highly efficient electrical specification, pressure type operating principle, low impedance (2.2 kΩ), and high reliability under adverse shock, vibration and other environmental conditions. It utilizes a magnet for attachment to the microphone station base assembly and is supplied with a circular coiled cable which is built into the housing assembly. A strain relief is built into the housing end of the cable and locks into the housing. The terminations at each end are molded, 6 wire, RJ25 connectors which provide extra strength and resistance to failure by pull-out.2
Electrical
Auxiliary Input
Auxiliary Output
Microphone Input
- Microphone Input: Total Harmonic Distortion, THD 22 Hz - 22 kHz, Input Level = 0 dBu
- <0.03%2
Digital Audio Processing
Mechanical
Environmental
Connectors
LCD Touchscreen
Dimensional Drawings
- Dimensional Drawings
- 11.820 [300.23] 4.770 [121.15] 4.440 [112.78] 6.264 [159.11] 10.880 [276.35] 6.066 [154.09]2
Architect and Engineer Specifications
- Architect and Engineer Specifications
- The touchscreen digital microphone stations shall provide for immediate digitization of full bandwidth audio, and transmission over a standard Ethernet connection using the Integrated Audinate Dante® Digital Message Transport. The touchscreen digital microphone stations shall a fully programmable touchscreen interface with a 7" LCD diagonal screen with 800 x 480 resolution and capacitive touch technology. The touchscreen shall provide ability to initiate audio / visual announcements, messages, and pages. It shall have indicators for power, busy, ready, fault, and alarm states, as well as an audible signal device to alert the operator to the status of the Microphone Station while in operation. The touchscreen digital microphone station shall be powered via PoE (Power over Ethernet) connection and be networkable through the Ethernet ports provided on the rear chassis. It shall include a secondary Ethernet port for redundant backup capability. The digital microphone station shall provide two microphone configurations. The first option shall be -H version with a condenser handheld microphone with a programmable push-to-talk switch integrated with a microphone preamplifier and an audio line driver. The microphone element and preamplifier shall be mounted in a teardrop shaped molded black textured housing. It shall utilize a magnet for attachment to the microphone station base assembly and be supplied with a circular coiled cable which is built into the housing assembly. The terminations shall be a molded, 6 wire, RJ25 connectors which provide extra strength and resistance to failure by pull-out. The second microphone option shall be -G version with a gooseneck microphone providing an omnidirectional electret condenser microphone cartridge integrated with a microphone preamplifier and an audio line driver. The microphone element shall be mounted in the windscreen portion of the gooseneck. The preamplifier and line driver are on a PC board mounted inside the base of the gooseneck on an XLR connector. The microphone assembly shall be a 12" gooseneck with a windscreen at the top and a 5-pin XLR connector in the base for mounting. The touchscreen digital microphone stations shall provide the ability to mount into a flat surface or desktop free standing configuration. The Digital Microphone Station shall be the AtlasIED IPCSDTOUCH.2
Sources: atlasied.com, Product page, read Nov 2, 2026 UTC; atlasied.com, IPCSDTouch-Datasheet, read Nov 2, 2026 UTC.
Size and weight
Inches and pounds, millimetres and kilograms
The product
| What | Inches and pounds | Millimetres and kilograms |
|---|---|---|
| Dimensions | W11.82 | W300 |
Figures in black are the maker’s. Figures in grey are converted by the wiki (1 in = 25.4 mm, 1 lb = 0.45359237 kg).
Compare with
1 of the same family on the wiki
More from AtlasIED
26 pages on the wiki
Documents
1 linked, none copied here
- IPCSDTouch-Datasheetdata sheet
References
2 sources, each with the day it was read
- atlasied.com, Product page, read Nov 2, 2026 UTC. Supports 6 specifications
- atlasied.com, IPCSDTouch-Datasheet, read Nov 2, 2026 UTC. Supports 36 specifications, the documents
Page history
Every read and every change to this page, newest first
- Page created from the maker’s page by a low-cost AI reader, among the products buyers searched on PriceQ. Product type proposed. Descriptions written at three lengths from the specifications. Every number held to the source’s own text with no AI.Qwen 3.7 Flash (AI agent) · Not reviewed yet
- Read on atlasied.com: Product page; IPCSDTouch-Datasheet.Qwen 3.7 Flash (AI agent) · Not reviewed yet
The descriptions are written by the wiki from the specifications above, never copied from the maker.