Modular Amplifiers
Last updated Nov 1, 2026 · 2 entries in Page history
The V35 is the 35W model of Bogen's Power Vector modular amplifiers, with eight bays for plug-in modules, four levels of priority between them and a motorized master volume control.
As the source prints itPower Output (RMS): RatedV35 V60 V100 V150 V250
35W 60W 100W 150W 250WPress to see it in the sheet ↓
As the source prints itPower Output (RMS): Typical @ 1 kHz*V35 V60 V100 V150 V250
45W 85W 140W 200W 340WPress to see it in the sheet ↓
As the source prints itFeatures5 models ranging from 35W to 250W each; a mixer-only version (VMIX) is also available
Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads
8 module bays
Wide selection of advanced plug-in modules (modules sold separately)
4 levels of priority between modules
2 module bays capable of handling plug-in signal-processing output modules
11-segment LED output level meter monitors the output level of the power amplifier with Avg./Peak meter switch
Motorized master volume control can be remotely operated
Lockable switch permits user to select either transformer-coupled outputs or a direct low-impedance output
5-position barrier strip, with clamping washers, provides connections for speaker loads
Bridging In/Out connector
External access to priority mute buses
Bridging jack and Mute terminals join multiple Power Vector amps and mixers together
Independent volume control for each of the eight module bays
Two-color LED for each channel indicates input signal or clipping
Bass and treble control with bypass switch (located in module bay 6)
125 Hz Low Cut switch (located in module bay 6)
Signal-processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input
Pre-EQ, unbalanced, buffered output signal ("post" all unit controls, but "pre" any external "Insert" equipment connected)
Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment
8 module security cover/filler plates included with amplifier (PVMC)
Push-button remote volume control panel (Model RVCP, sold separately)
Security cover to selectively protect volume, bass, and treble controls (Model PVSC, sold separately)
Rack mountable (with rack mounting kit RPK87, sold separately)
2 rack spaces high (3-1/2")
Listed to UL Standard 60065 for U.S. and CanadaPress to see it in the sheet ↓
As the source prints itProduct Weight (lb.)V35 V60 V100 V150 V250
22 26 28 31 32Press to see it in the sheet ↓
- Part number or model
- V35
- Type
- Power amplifier
- Catalog number
- Not assigned yet
No confirmed photo of this model
Specifications
42 fields, as the sources state them
Modular Amplifiers V35/V60/V100/V150/V250
- Models
- V35, V60, V100, V150, V250 - Power Vector Series1
Compatibility
- Compatibility
- RPK87 - Rack Mount Kit Modules1
Description
- Description
- Bogen's Power Vector modular amplifiers offer a wide range of power levels from which to choose, with five models from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting plug-in signal-processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).2
Features
- Features
- 5 models ranging from 35W to 250W each; a mixer-only version (VMIX) is also available Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads 8 module bays Wide selection of advanced plug-in modules (modules sold separately) 4 levels of priority between modules 2 module bays capable of handling plug-in signal-processing output modules 11-segment LED output level meter monitors the output level of the power amplifier with Avg./Peak meter switch Motorized master volume control can be remotely operated Lockable switch permits user to select either transformer-coupled outputs or a direct low-impedance output 5-position barrier strip, with clamping washers, provides connections for speaker loads Bridging In/Out connector External access to priority mute buses Bridging jack and Mute terminals join multiple Power Vector amps and mixers together Independent volume control for each of the eight module bays Two-color LED for each channel indicates input signal or clipping Bass and treble control with bypass switch (located in module bay 6) 125 Hz Low Cut switch (located in module bay 6) Signal-processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input Pre-EQ, unbalanced, buffered output signal ("post" all unit controls, but "pre" any external "Insert" equipment connected) Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment 8 module security cover/filler plates included with amplifier (PVMC) Push-button remote volume control panel (Model RVCP, sold separately) Security cover to selectively protect volume, bass, and treble controls (Model PVSC, sold separately) Rack mountable (with rack mounting kit RPK87, sold separately) 2 rack spaces high (3-1/2") Listed to UL Standard 60065 for U.S. and Canada2
Technical Specifications
- Power Output (RMS): Rated
- V35 V60 V100 V150 V250 35W 60W 100W 150W 250W2
- Power Output (RMS): Typical @ 1 kHz*
- V35 V60 V100 V150 V250 45W 85W 140W 200W 340W2
- Frequency Response: Transformer
- 45 Hz to 20 kHz; +0/-2 dB2
- Frequency Response: Direct
- 20 Hz to 20 kHz; +0/-1 dB2
- Distortion: Transformer
- < 0.5%**2
- Distortion: Direct
- < 0.1%** (.05 typical @ 1 kHz)2
- Signal-to-Noise†: Fundamental
- -94 dB2
- Signal-to-Noise†: With SAX1R Module
- -70 dB2
- Signal-to-Noise†: With MIC1S Module
- -60 dB2
- Signal-to-Noise†: With TEL1S Module
- -70 dB2
- Tone Controls: Bass Frequency
- @100 Hz (+/- 10 dB minimum)2
- Tone Controls: Treble Frequency
- @10 kHz (+/- 10 dB minimum)2
- Tone Controls: Low Cut Frequency
- @125 Hz (-6 dB/octave)2
- Sensitivity
- 0.4V (at backplane connector)2
- Output Regulation
- 2 dB or better, no load to full load2
- Output Impedance: Transformer-Coupled
- 70V, 25V, 8 ohms (bal or unbal)2
- Output Impedance: Direct Coupled
- 4 ohms (minimum)2
- Thermal Emissions (BTU/hr.)
- V35 V60 V100 V150 V250 174.2 204.9 495.2 696.7 911.92
- Inserts: Insert "OUT" Level
- 1VRMS (@FRP)2
- Inserts: Insert "OUT" Impedance
- 50 ohms maximum2
- Inserts: Insert "IN" Sensitivity
- 1VRMS2
- Inserts: Insert "IN" Impedance
- 10k ohms minimum2
- Bridging In/Out: Bus Level
- 250 mVRMS (@FRP)2
- Bridging In/Out: Bus Impedance
- 10k ohms maximum2
- Pre-EQ Output: Output Level
- 4VRMS (@FRP)2
- Pre-EQ Output: Output Impedance
- 50 ohms maximum2
- AC Power Receptacle
- 500 watts maximum power, unswitched2
- AC Voltage
- 120V AC, 60 Hz2
- AC Current
- V35 V60 V100 V150 V250 0.6A 1.3A 2.0A 3.5A 5.5A2
- Product Weight (lb.)
- V35 V60 V100 V150 V250 22 26 28 31 322
- Dimensions
- 17-1/4" W x 3-7/8" H x 14-3/4" D (all models)2
- Notes
- * Typical, @1 kHz/0.1% THD/4-ohm direct ** THD+N, Maximum, Full bandwidth @ FRP † Referenced to FRP output level, 20 Hz to 20 kHz bandwidth limited2
Performance Specifications
Package Contents
- Package Contents
- Power Vector Amplifier Switch Lock Instruction Manual Module Covers (8) 12 mm Module Cover Screws (16)3
Limited Warranty
- Limited Warranty
- The Bogen Power Vector Amplifiers are warranted to be free from defects in material and workmanship for three (3) years from the date of sale to the original purchaser.3
Sources: bogen.com, Product page: title, model line and "Compatibility" list, read Nov 1, 2026 UTC; bogen.com, "Power Vector Series Specifications Sheet" PDF linked from the product page, read Nov 1, 2026 UTC; bogen.com, "Power Vector Series Brochure" PDF linked from the product page, read Nov 1, 2026 UTC; bogen.com, "Power Vector Series Manual" PDF linked from the product page, read Nov 1, 2026 UTC.
Size and weight
Inches and pounds, millimetres and kilograms
The product
| What | Inches and pounds | Millimetres and kilograms |
|---|---|---|
| Dimensions | W17-1/4 | W438.2 |
| Weight | 22 lb | 9.98 kgconverted |
Figures in black are the maker’s. Figures in grey are converted by the wiki (1 in = 25.4 mm, 1 lb = 0.45359237 kg).
Compare with
18 of the same family on the wiki
Bogen · Power amplifierHTA125ASide by side with V35 →
Bogen · Power amplifierC100Side by side with V35 →
Ashly · Power amplifierFX500.4Side by side with V35 →
Ashly · Power amplifierFX60.4Side by side with V35 →
AtlasIED · Power amplifierAA60GSide by side with V35 →- No confirmed photo of this modelBogen · Power amplifierC10Side by side with V35 →
- No confirmed photo of this modelBogen · Power amplifierGS35Side by side with V35 →
Bogen · Power amplifierPS120Side by side with V35 →
More from Bogen
12 pages on the wiki
Documents
3 linked, none copied here
- Power Vector Series Specifications Sheetspec sheet
- Power Vector Series Manualmanual
- Power Vector Series Brochurebrochure
References
4 sources, each with the day it was read
- bogen.com, Product page: title, model line and "Compatibility" list, read Nov 1, 2026 UTC. Supports 2 specifications, the related products, the documents
- bogen.com, "Power Vector Series Specifications Sheet" PDF linked from the product page, read Nov 1, 2026 UTC. Supports 34 specifications, the related products
- bogen.com, "Power Vector Series Manual" PDF linked from the product page, read Nov 1, 2026 UTC. Supports 2 specifications
- bogen.com, "Power Vector Series Brochure" PDF linked from the product page, read Nov 1, 2026 UTC. Supports 4 specifications
Page history
Every read and every change to this page, newest first
- Page created from the maker’s page, among the products buyers searched on PriceQ. Product type proposed. Descriptions written at three lengths from the specifications.Claude Opus (AI agent) · Not reviewed yet
- Read on bogen.com: Product page: title, model line and "Compatibility" list; "Power Vector Series Specifications Sheet" PDF linked from the product page; "Power Vector Series Manual" PDF linked from the product page; "Power Vector Series Brochure" PDF linked from the product page.Claude Opus (AI agent) · Not reviewed yet
The descriptions are written by the wiki from the specifications above, never copied from the maker.
Live prices · PriceQ
What sellers ask for the Bogen V35 today.
The wiki holds what the maker publishes. PriceQ looks up the sellers. The button opens it with this product already filled in.