Industrial Modbus Router
Last updated Nov 1, 2026 · 2 entries in Page history
The Teltonika RUT140 is an industrial Modbus router with two 10/100 Mbps Ethernet ports, Wi-Fi 4, an integrated DIN rail bracket and a 9-30 VDC input through a 3-pin power connector.
As the source prints itEthernet2 x RJ45 ports, 10/100 MbpsPress to see it in the sheet ↓
As the source prints itPower consumptionIdle: < 1 W / Max: < 2 WPress to see it in the sheet ↓
As the source prints itDimensions (W x H x D)113.10 x 25 x 68.6 mmPress to see it in the sheet ↓
As the source prints itWeight142.3 gPress to see it in the sheet ↓
- Part number or model
- RUT140
- Type
- Router
- Catalog number
- Not assigned yet
- Searched on PriceQ as
- “Teltonika RUT140000000”
Timeline
Dates from the sources in References
- 10 April 2024Introduced by Teltonika
Specifications
115 fields, as the sources state them
INDUSTRIAL MODBUS ROUTER
Wireless
- Wireless mode
- 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)1
- Wi-Fi security
- WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)1
- SSID/ESSID
- SSID stealth mode and access control based on MAC address1
- Wi-Fi users
- Up to 50 simultaneous connections1
- Wireless Connectivity Features
- Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)1
- Wireless MAC filter
- Allowlist, blocklist1
- Wireless QR code generator
- Once scanned, a user will automatically enter your network without needing to input login information1
- TravelMate
- Forward Wi-Fi hotspot landing page to a subsequent connected device1
Ethernet
Network
- Routing
- Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing1
- Network protocols
- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN1
- VoIP passthrough support
- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets1
- Connection monitoring
- Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection1
- Network: Firewall
- Port forward, traffic rules, custom rules, TTL target customisation1
- Firewall status page
- View all your Firewall statistics, rules, and rule counters1
- Port management
- View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on1
- Network topology
- Visual representation of your network, showing which devices are connected to which other devices1
- DHCP
- Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards1
- QoS / Smart Queue Management (SQM)
- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e1
- DDNS
- Supported >77 service providers, others can be configured manually1
- DNS over HTTPS
- DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS1
- Network backup
- Wi-Fi WAN, VRRP, Wired options, each of which can be used as an automatic Failover1
- Load balancing
- Balance Internet traffic over multiple WAN connections1
- Hotspot
- Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes1
- SSHFS
- Possibility to mount remote file system via SSH protocol1
- Traffic Management
- Real-time monitoring, wireless signal charts, traffic usage history1
Security
- Authentication
- Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator1
- Security: Firewall
- Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT641
- Attack prevention
- DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)1
- VLAN
- Port and tag-based VLAN separation1
- WEB filter
- Block list for blocking out unwanted websites, allow list for specifying allowed sites only1
- Access control
- Flexible access control of SSH, Web interface, CLI and Telnet1
- Certificate Manager
- Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates1
- 802.1x
- Port-based network access control server1
VPN
- OpenVPN
- Multiple clients and a server can run simultaneously, 27 encryption methods1
- OpenVPN Encryption
- DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 2561
- IPsec
- XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)1
- GRE
- GRE tunnel, GRE tunnel over IPsec support1
- PPTP, L2TP
- Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support1
- Stunnel
- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code1
- DMVPN
- Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support1
- SSTP
- SSTP client instance support1
- ZeroTier
- ZeroTier VPN client support1
- WireGuard
- WireGuard VPN client and server support1
- Tinc
- Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.1
- EoIP
- Ethernet over IP (EoIP) tunnelling is a protocol based on GRE RFC 1701 that creates an Ethernet tunnel between two routers on top of an IP connection1
BacNET
OPC UA
MODBUS
- MODBUS: Supported modes
- Server, Client1
- MODBUS: Supported connection types
- TCP1
- Custom registers
- MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality1
- Supported data formats
- 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII1
Data to Server
MQTT Gateway
- Modbus MQTT Gateway
- Allows sending commands and receiving data from MODBUS Server through MQTT broker1
DNP3
DLMS/COSEM
API
- Teltonika Networks Web API (beta) support
- Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com1
Monitoring & Management
- Monitoring & Management: WEB UI
- HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status1
- Monitoring & Management: FOTA
- Firmware update from server, automatic notification1
- SSH
- SSH (v1, v2)1
- Receive email message status alerts of various services1
- TR-069
- OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem1
- MQTT
- MQTT Broker, MQTT publisher1
- SNMP
- SNMP (v1, v2, v3), SNMP Trap, Brute force protection1
- JSON-RPC
- Management API over HTTP/HTTPS1
- Monitoring & Management: RMS
- Teltonika Remote Management System (RMS)1
IoT Platforms
- Cumulocity - Cloud of Things
- Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions1
- Azure IoT Hub
- Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs1
System Characteristics
Firmware/Configuration
- Firmware/Configuration: WEB UI
- Update FW from file, check FW on server, configuration profiles, configuration backup1
- Firmware/Configuration: FOTA
- Update FW1
- Firmware/Configuration: RMS
- Update FW/configuration for multiple devices at once1
- Keep settings
- Update FW without losing current configuration1
- Factory settings reset
- A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration1
FIRMWARE CUSTOMISATION
- Operating system
- RutOS (OpenWrt based Linux OS)1
- Supported languages
- Busybox shell, Lua, C, C++1
- Development tools
- SDK package with build environment provided1
- GPL customization
- You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs1
- Package Manager
- The Package Manager is a service used to install additional software on the device1
Power
- Connector
- 3-pos plugable terminal block1
- Input voltage range
- 9-30 VDC, reverse polarity protection, surge protection >31 VDC 10us max1
- PoE (passive)
- Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC1
- Power consumption
- Idle: < 1 W / Max: < 2 W1
Physical Interfaces
Physical Specification
Operating Environment
Ordering
History
- Introducing the new RUT140 Ethernet and RUT142 RS232 routers
- 10 April 20243
Sources: teltonika-networks.com, Product page, feature boxes under the title, read Nov 1, 2026 UTC; teltonika-networks.com, Product page, "Ordering" tab, read Nov 1, 2026 UTC; teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC.
Size and weight
Inches and pounds, millimetres and kilograms
The product
| What | Inches and pounds | Millimetres and kilograms |
|---|---|---|
| Dimensions | W4.45 | W113.10 |
| Weight | 0.314 lbconverted | 142.3 g0.1423 kgconverted |
Figures in black are the maker’s. Figures in grey are converted by the wiki (1 in = 25.4 mm, 1 lb = 0.45359237 kg).
Compare with
5 of the same family on the wiki
More from Teltonika
6 pages on the wiki
References
3 sources, each with the day it was read
- teltonika-networks.com, Product page, feature boxes under the title, read Nov 1, 2026 UTC. Supports 110 specifications
- teltonika-networks.com, Product page, "Ordering" tab, read Nov 1, 2026 UTC. Supports 4 specifications, the related products
- teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC. Supports 1 specification
Page history
Every read and every change to this page, newest first
- Page created from the maker’s page, among the products buyers searched on PriceQ. Product type proposed. Descriptions written at three lengths from the specifications.Claude Opus (AI agent) · Not reviewed yet
- Read on teltonika-networks.com: Product page, feature boxes under the title; Product page, "Ordering" tab; Newsroom post, title and the date printed under it.Claude Opus (AI agent) · Not reviewed yet
The descriptions are written by the wiki from the specifications above, never copied from the maker.
Live prices · PriceQ
What sellers ask for the Teltonika RUT140 today.
The wiki holds what the maker publishes. PriceQ looks up the sellers. The button opens it with this product already filled in.