TeltonikaCellular routerRead on teltonika-networks.comSearched on PriceQ

Cellular 5G Router

Last updated Nov 1, 2026 · 2 entries in Page history

The Teltonika RUTM50 is a cellular 5G router with speeds of up to 3.4 Gbps, two SIM slots, dual band Wi-Fi 5, GNSS and five 10/100/1000 Mbps Ethernet ports. It supports both SA & NSA 5G architectures.

3.4Gbps
5G speed: 11.5W
Max power consumption: 132 x 44.2 x 95.1mm
Dimensions (W x H x D): 519g
Weight

Part number or model: RUTM50
Type: Cellular router
Catalog number: Not assigned yet
Searched on PriceQ as: “Teltonika RUTM50000000”

Teltonika RUTM50, label face seen straight on

Timeline

Dates from the sources in References

23 May 2024Certified by FirstNet
28 October 2024Certified by Verizon

Specifications

157 fields, as the sources state them

CELLULAR 5G ROUTER

5G: Ultra-high cellular speeds of up to 3.4 Gbps1
DUAL SIM: Auto-failover, backup WAN, and other switching scenarios1
SA & NSA: Supports both SA & NSA 5G architectures1
FUTURE-PROOFING: Backward compatible with 4G (LTE Cat 19/18)1

Mobile

Mobile module: 5G Sub-6 GHz SA, NSA 2.4, 3.4Gbps DL (4x4 MIMO) 900, 550Mbps UL (2x2 MIMO); 4G LTE: DL Cat 19 1.6Gbps (4x4 MIMO), UL Cat 18 200Mbps1
3GPP Release: Release 161
SIM switch: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection1
Status: IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC1
Mobile: SMS: SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP1
USSD: Supports sending and reading Unstructured Supplementary Service Data messages1
Block/Allow list: Operator block/allow list (by country or separate operators)1
Multiple PDN: Possibility to use different PDNs for multiple network access and services1
Band management: Band lock, Used band status display1
SIM idle protection service: Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked1
SIM PIN code management: SIM PIN code management enables setting, changing, or disabling the SIM card's PIN1
APN: Auto APN1
Bridge: Direct connection (bridge) between mobile ISP and device on LAN1
Passthrough: Router assigns its mobile WAN IP address to another device on LAN1
Framed routing: Framed routing: support an IP network behind 5G UE1

Wireless

Wireless mode: 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO)1
Wi-Fi security: WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)1
SSID/ESSID: SSID stealth mode and access control based on MAC address1
Wi-Fi users: Up to 150 simultaneous connections1
Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)1
Wireless MAC filter: Allowlist, blocklist1
Wireless QR code generator: Once scanned, a user will automatically enter your network without needing to input login information1
TravelMate: Forward Wi-Fi hotspot landing page to a subsequent connected device1

Ethernet

WAN: 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover1
LAN: 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover1

Network

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing1
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN1
VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets1
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection1
Network: Firewall: Port forward, traffic rules, custom rules, TTL target customisation1
Firewall status page: View all your Firewall statistics, rules, and rule counters1
Port management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on1
Network topology: Visual representation of your network, showing which devices are connected to which other devices1
Hotspot: Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes1
DHCP: Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards1
QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e1
DDNS: Supported >77 service providers, others can be configured manually1
DNS over HTTPS: DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS1
Network backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover1
Load balancing: Balance Internet traffic over multiple WAN connections1
SSHFS: Possibility to mount remote file system via SSH protocol1
VRF support: Initial virtual routing and forwarding (VRF) support1
Traffic Management: Real-time monitoring, wireless signal charts, traffic usage history1

Security

802.1x: Port-based network access control client1
Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator1
Security: Firewall: Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT641
Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)1
VLAN: Port and tag-based VLAN separation1
Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number1
WEB filter: Block list for blocking out unwanted websites, allow list for specifying allowed sites only1
Access control: Flexible access control of SSH, Web interface, CLI and Telnet1
Certificate Manager: Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates1

VPN

OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods1
OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 2561
IPsec: XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)1
GRE: GRE tunnel, GRE tunnel over IPsec support1
PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support1
Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code1
DMVPN: Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support1
SSTP: SSTP client instance support1
ZeroTier: ZeroTier VPN client support1
WireGuard: WireGuard VPN client and server support1
Tinc: Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.1
Tailscale: Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol1

BacNET

BacNET: Supported modes: Router1
BacNET: Supported connection types: IP, RTU (RS485, USB)1
Configuration options: Support for multiple BACnet/IP interfaces, Network number assignment, Preconfigured BDT entries for BBMD (BACnet Broadcast Management Device)1

OPC UA

OPC UA: Supported modes: Client, Server1
OPC UA: Supported connection types: TCP1

MODBUS

MODBUS: Supported modes: Server, Client1
MODBUS: Supported connection types: TCP, USB1
Custom registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality1
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII1

Data to Server

Protocol: HTTP(S), MQTT, Azure MQTT1
Data to server: Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature1

MQTT Gateway

Modbus MQTT Gateway: Allows sending commands and receiving data from MODBUS Server through MQTT broker1

DNP3

DNP3: Supported modes: Station, Outstation1
Supported connection: TCP, USB1

DLMS/COSEM

DLMS Support: DLMS - standard protocol for utility meter data exchange1
DLMS/COSEM: Supported modes: Client1
DLMS/COSEM: Supported connection types: TCP1

Site Manager

Site Manager: Supported modes: Manager1
Functionalities: Centralized management of TAP access points and Teltonika's managed switches — including device pairing and grouping, FOTA updates, device status monitoring, automatic reboot scheduling with ping/wget health checks, wireless SSID configuration, and VLAN assignment across the site.1

Monitoring & Management

Monitoring & Management: WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status1
Monitoring & Management: FOTA: Firmware update from server, automatic notification1
SSH: SSH (v1, v2)1
Monitoring & Management: SMS: SMS status, SMS configuration1
Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off1
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem1
MQTT: MQTT Broker, MQTT publisher1
SNMP: SNMP (v1, v2, v3), SNMP Trap, Brute force protection1
JSON-RPC: Management API over HTTP/HTTPS1
Monitoring & Management: RMS: Teltonika Remote Management System (RMS)1

IoT Platforms

ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type1
Cumulocity - Cloud of Things: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions1
Azure IoT Hub: Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs1
AWS IoT Core: Utility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality1

System Characteristics

CPU: MediaTek, Dual-Core, 880 MHz, MIPS1004Kc1
RAM: 256 MB, DDR31
FLASH storage: 16 MB serial NOR flash, 256 MB serial NAND flash1

Firmware/Configuration

Firmware/Configuration: WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup1
Firmware/Configuration: FOTA: Update FW1
Firmware/Configuration: RMS: Update FW/configuration for multiple devices at once1
Keep settings: Update FW without losing current configuration1
Factory settings reset: A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration1

FIRMWARE CUSTOMISATION

Operating system: RutOS (OpenWrt based Linux OS)1
Supported languages: Busybox shell, Lua, C, C++, and Python, Java in Package manager1
Development tools: SDK package with build environment provided1
GPL customization: You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs1
Package Manager: The Package Manager is a service used to install additional software on the device1

Location Tracking

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS1
Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS1
NMEA: NMEA 01831
NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)1
Server software: Supported server software TAVL, RMS1
Geofencing: Configurable multiple geofence zones1

USB

Data rate: USB 2.01
Applications: Samba share, USB-to-serial1
External devices: Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter1
Storage formats: FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext41

Input/Output

Input: 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 50 V detected as logic high1
Output: 1 x Digital Output, Open collector output, max output 50 V, 300 mA1
Events: Email, RMS, SMS1
I/O juggler: Allows to set certain I/O conditions to initiate event1

Power

Connector: 4-pin industrial DC power socket1
Input voltage range: 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max1
PoE (passive): Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC1
Power consumption: Idle: < 5 W, Max: < 11.5 W1

Physical Interfaces

Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps1
I/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connector1
Status LEDs: 4 x WAN type, 3 x Mobile connection type, 3 x Mobile connection strength, 10 x Ethernet port status, 1 x Power, 2 x 2.4G and 5G Wi-Fi1
SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V1
Power: 1 x 4-pin power connector1
Antennas: 4 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x SMA for GSNS1
USB: 1 x USB A port for external devices1
Reset: Reboot/User default reset/Factory reset button1
Other: 1 x Grounding screw1

Physical Specification

Casing material: Anodised aluminium housing and panels1
Dimensions (W x H x D): 132 x 44.2 x 95.1 mm1
Weight: 519 g1
Mounting options: DIN rail, wall mount, flat surface (all require additional kit)1

Operating Environment

Operating temperature: -40 °C to 75 °C1
Operating humidity: 10% to 90% non-condensing1
Ingress Protection Rating: IP301

Ordering

STANDARD PACKAGE*: RUTM50 Router 18 W PSU 4 x Mobile antennas (swivel, SMA male) 2 x Wi-Fi antennas (magnetic mount, RP-SMA male, 1.5 m cable) 1 x GNSS antenna (adhesive, SMA male, 3 m cable) Ethernet cable (1.5 m) SIM Adapter kit QSG (Quick Start Guide) Packaging box *Standard package contents may differ based on standard order codes.2
HS Code: 8517622
HTS: 8517.62.002
RUTM50 0*****: Supported frequencies: 5G NR NSA: n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78 5G NR SA: n2, n5, n7, n12, n13, n14, n25, n26, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78 5G DL 4 × 4 MIMO: n2, n5, n7, n12, n13*, n14, n25, n26*, n29, n30, n38, n41, n48, n66, n70, n71, n77, n78 4G (LTE-FDD): B2, B4, B5, B7, B12, B13, B14, B17, B25, B26, B29, B30, B66, B71 4G (LTE-TDD): B38, B41, B42, B43, B482
RUTM50 3*****: Supported frequencies: 5G NR NSA: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n75, n76, n77, n78 5G NR SA: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n75, n76, n77, n78 5G DL 4 × 4 MIMO: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n75, n76, n77, n78 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32 4G (LTE-TDD): B38, B40, B41, B42, B43 3G: B1, B5, B82
RUTM50 A*****: Supported frequencies: 5G NR NSA: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77, n78 5G NR SA: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77, n78 5G DL 4 × 4 MIMO: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77, n78 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32, B71 4G (LTE-TDD): B38, B40, B41, B42, B43 3G: B1, B5, B82
AVAILABLE VERSIONS: The price and lead-times for region (operator) specific versions may vary. For more information please contact us. 1 - Regional availability - excluding Russia, Belarus & Iran 2 - For more detailed information about certified carriers, visit our Wiki page2

History

Teltonika’s RUTM50 5G Router Certified by FirstNet: 23 May 20244
Teltonika’s RUTM50 5G Router Certified by Verizon: 28 October 20245

Sources: teltonika-networks.com, Product page, feature boxes under the title, read Nov 1, 2026 UTC; teltonika-networks.com, Product page, "Ordering" tab, read Nov 1, 2026 UTC; teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC; teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC.

Size and weight

Inches and pounds, millimetres and kilograms

The product

What	Inches and pounds	Millimetres and kilograms
Dimensions	W5.2×H1.74×D3.74 inconverted	W132×H44.2×D95.1 mm
Weight	1.14 lbconverted	519 g0.519 kgconverted

Figures in black are the maker’s. Figures in grey are converted by the wiki (1 in = 25.4 mm, 1 lb = 0.45359237 kg).

Compare with

5 of the same family on the wiki

Compare all 4 together

More from Teltonika

6 pages on the wiki

All 6 Teltonika pages →

References

5 sources, each with the day it was read

teltonika-networks.com, Product page, feature boxes under the title, read Nov 1, 2026 UTC. Supports 148 specifications
teltonika-networks.com, Product page, "Ordering" tab, read Nov 1, 2026 UTC. Supports 7 specifications, the related products
teltonika-networks.com, EOL Products page, list of EOL products, rows RUTX14 and RUTX50, read Nov 1, 2026 UTC. Supports the related products
teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC. Supports 1 specification
teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC. Supports 1 specification

Page history

Every read and every change to this page, newest first

Nov 1, 2026, 04:34 UTCPage created from the maker’s page, among the products buyers searched on PriceQ. Product type proposed. Descriptions written at three lengths from the specifications.Claude Opus (AI agent) · Not reviewed yet
Nov 1, 2026, 03:44 UTCRead on teltonika-networks.com: Product page, feature boxes under the title; Product page, "Ordering" tab; EOL Products page, list of EOL products, rows RUTX14 and RUTX50; Newsroom post, title and the date printed under it.Claude Opus (AI agent) · Not reviewed yet

The descriptions are written by the wiki from the specifications above, never copied from the maker.

Live prices · PriceQ

What sellers ask for the Teltonika RUTM50 today.

The wiki holds what the maker publishes. PriceQ looks up the sellers. The button opens it with this product already filled in.

Get live prices

RUTM50Cellular 5G Router