Single or Dual Path Light Commercial Fire Communicator (Verizon)
Last updated Nov 1, 2026 · 2 entries in Page history
The Honeywell HWF2V-COM is a single or dual path light commercial fire communicator for Verizon LTE and IP. It offers Contact ID reporting with any fire alarm control panel with a built-in dialer.
As the source prints itCABINET SPECIFICATIONS: Dimensions14.875" H x 12.75" W x 3.0" D
(37.8cm H x 32.4cm W x 7.6cm D)Press to see it in the sheet ↓
As the source prints itPower SupplyPrimary: 120VAC, 60Hz, 0.5A, Secondary: 18VDC, 50VAPress to see it in the sheet ↓
As the source prints itProduct OverviewThe HWF2-COM Series LTE/IP fire communicators have three selectable reporting paths including LTE cellular only, IP only, or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the AlarmNet® network control center which routes highly encrypted, cybersecured data packets via a customer-provided Internet connection or LTE cellular network to the appropriate central station.
LTE and IP connection tested every day
Requires no change to the existing FACP configuration
Plan choices range from 5 minute, 60 minute, 6 hour, and 24 hour supervision intervals
Data transmits over standard Contact ID protocol but is secured with the industry’s advanced encryption standard (AES 256 bit)
Supports both dynamic (DHCP) or public and private Static IP addressing
Reliable connection: IP and cellular connection tested every day
Built-in, standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervision
Diagnostic LEDs indicate signal strength and status
7720P Handheld programmer for easy setupPress to see it in the sheet ↓
As the source prints itProduct OverviewThe HWF2-COM Series LTE/IP fire communicators have three selectable reporting paths including LTE cellular only, IP only, or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the AlarmNet® network control center which routes highly encrypted, cybersecured data packets via a customer-provided Internet connection or LTE cellular network to the appropriate central station.
LTE and IP connection tested every day
Requires no change to the existing FACP configuration
Plan choices range from 5 minute, 60 minute, 6 hour, and 24 hour supervision intervals
Data transmits over standard Contact ID protocol but is secured with the industry’s advanced encryption standard (AES 256 bit)
Supports both dynamic (DHCP) or public and private Static IP addressing
Reliable connection: IP and cellular connection tested every day
Built-in, standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervision
Diagnostic LEDs indicate signal strength and status
7720P Handheld programmer for easy setupPress to see it in the sheet ↓
- Part number or model
- HWF2V-COM
- Catalog number
- Not assigned yet
Specifications
35 fields, as the sources state them
Product
- Description
- The HWF2-COM Series LTE/IP fire communicators are single or dual path light commercial fire alarm communicators that offer Contact ID reporting with any FACP (fire alarm control panel) with a built-in dialer.1
Specifications
- For Use With
- CELL-ANT3DB: 3dBA gain antenna, WA7626-CA: SMA to N adapter cable, 7626-50HC: 50 ft. antenna cable, low loss1
- Application
- Single or dual path commercial fire alarm communicators1
- Approvals and Standards
- UL Listed: S789, CSFM: 7300-1645:0511, FDNY: Approved1
- Includes
- Red cabinet with key and lock, Wall outlet box, Dialer capture module, LTE communications module, Antenna and mounting adapter, LED display board, Transformer, PowerBoost1 power supply1
- Power Supply
- Primary: 120VAC, 60Hz, 0.5A, Secondary: 18VDC, 50VA1
- Product Height
- 14.88 in, 37.8 cm1
- Product Width
- 12.75 in, 32.4 cm1
- Product Weight
- 5.3 lb, 6.94 kg1
- Product Depth
- 9.25 in, 23.9 cm1
- Color
- Red1
- Ambient Relative Humidity (Max)
- 93 % RH +/- 2%1
- Ambient Operating Temperature (Max)
- 120 °F, 49 °C1
- Ambient Operating Temperature (Min)
- 32 °F, 0 °C1
- Carrier
- Verizon1
- Indoor or Outdoor Use
- Indoor1
Product Overview
- Product Overview
- The HWF2-COM Series LTE/IP fire communicators have three selectable reporting paths including LTE cellular only, IP only, or IP primary with LTE cellular backup. All signals from the HWF2-COM Series are delivered to the AlarmNet® network control center which routes highly encrypted, cybersecured data packets via a customer-provided Internet connection or LTE cellular network to the appropriate central station. LTE and IP connection tested every day Requires no change to the existing FACP configuration Plan choices range from 5 minute, 60 minute, 6 hour, and 24 hour supervision intervals Data transmits over standard Contact ID protocol but is secured with the industry’s advanced encryption standard (AES 256 bit) Supports both dynamic (DHCP) or public and private Static IP addressing Reliable connection: IP and cellular connection tested every day Built-in, standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervision Diagnostic LEDs indicate signal strength and status 7720P Handheld programmer for easy setup1
Technical Specifications
CABINET SPECIFICATIONS
- CABINET SPECIFICATIONS: Dimensions
- 14.875" H x 12.75" W x 3.0" D (37.8cm H x 32.4cm W x 7.6cm D)2
SHIPPING DIMENSIONS
TEMPERATURE AND HUMIDITY RANGES
- TEMPERATURE AND HUMIDITY RANGES
- This system meets NFPA requirements for operation at 0-49° C/32-120° F and at a relative humidity 93% +- 2% RH (noncondensing at 32° C +- 2° C (90° F +-3° F). However the useful life of the system’s standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15-27° C/60-80° F.2
PRODUCT LINE INFORMATION
- HWF2V-COM
- LTE® Digital Cellular Fire Alarm Communicator and Internet Panel, Verizon® LTE/IP2
- Both models include
- Red cabinet with key and lock Wall outlet box Dialer capture module LTE communications module Antenna and mounting adapter PowerBoost1 power supply LED display board Transformer Manual and required screws Cables, etc.2
ANTENNA AND EXTERNAL HARDWARE
- ANTENNA AND EXTERNAL HARDWARE
- CELL-ANT3DB: 3dBA gain antenna WA7626-CA: SMA to N adapter cable 7626-50HC: 50 ft. antenna cable, low loss Note: The WA7626-CA adapter cable and 7626-50HC antenna cable are only required when installing the CELL-ANT3DB antenna remotely.2
OTHER ACCESSORIES
- OTHER ACCESSORIES
- 7720P: HWF2V-COM, HWF2A-COM and IPGSM-4G handheld programmer HPTCOVER: Plug-in transformer box for HWF2V-COM, HWF2A-COM, and IPGSM-4G communicators BAT-1270: Battery 12 Volts, 7AH, sealed2
AGENCY LISTINGS AND APPROVALS
- AGENCY LISTINGS AND APPROVALS
- The listings and approvals below apply to the HWF2-COM Series communicators. In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult the factory for latest listings. UL Listed: S789 CSFM: 7300-1645:0511 FDNY: Approved2
Features & Benefits
- Features & Benefits
- LTE and IP connection tested every day Three selectable reporting paths: LTE cellular only, IP only, or IP Primary with LTE cellular backup Requires no change to the existing FACP configuration Connects directly to the primary and secondary telephone ports of a DACT Plan choices range from 5 minute, 60 minute, 6 hour, and 24 hour supervision intervals Operates over hardwired Ethernet or LTE Works over any type of customer provided Ethernet 10/100 based network connection (LAN or WAN), DSL model or cable modem Data transmits over standard Contact ID protocol but is secured with the industry’s advanced encryption standard (AES 256 bit) Supports both dynamic (DHCP) or public and private Static IP addressing Reliable connection: IP and cellular connection tested every day Built-in, standalone power supply module. Onboard charging circuit design accommodates battery backup. Includes primary power and battery supervision Diagnostic LEDs indicate signal strength and status Choice of LTE provider services QOS: Quality of Service diagnostics via AlarmNet conveys vital communicator information including signal strength, message path used, and when the message was received 7720P Handheld programmer for easy setup2
Selectable paths and supervision timing intervals
- Selectable paths and supervision timing intervals
- 2010 Cell: Single path, cellular, 5 Minutes 2010 IP: Single path, IP, 5 Minutes 2010 IP & Cell: Dual path, IP, & cellular, 24 Hours 2013 Cell: Single path, cellular, 60 Minutes 2013 IP: Single path, IP, 60 Minutes 2013 IP & Cell: Dual path, IP, & cellular, 6 Hours2
FIRE COMMUNICATOR/PANEL CAPABILITY
- FIRE COMMUNICATOR/PANEL CAPABILITY
- The HWF2-COM Series is compatible with fire alarm control panels that use the Contact ID communications format as described in the SIA DC-05 standard.2
INSTALLATION REQUIREMENTS, UL COMPLIANCE
- INSTALLATION REQUIREMENTS, UL COMPLIANCE
- To meet UL864/NFPA requirements, ensure the following: HWF2-COM Series must be installed in accordance with the National Fire Protection Association (NFPA) standards 70 and 72. HWF2-COM Series must be mounted in the same room and within 20 feet of the fire panel. HWF2-COM Series and all equipment used for the IP connection (e.g., router, hub, modem, etc) must be UL-listed, powered from an unswitched branch circuit, and be provided with appropriate standby power. HWF2-COM Series must use the 7AH battery (not included) to provide 24 hour backup capability. The Telco line wiring and the Power Transformer wiring must be routed through conduit.2
Ordering
- Manufacturer
- The Honeywell trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.2
Sources: resideo.com, Specifications table and Product Overview, read Nov 1, 2026 UTC; resideo.com, HWF2-COM Series Fire Communicator Data Sheet, L/HWF2COMDS/D, all pages, read Nov 1, 2026 UTC.
Size and weight
Inches and pounds, millimetres and kilograms
The product
| What | Inches and pounds | Millimetres and kilograms |
|---|---|---|
| DimensionsCabinet | H14.875 | H37.8 |
The packaging
| What | Inches and pounds | Millimetres and kilograms |
|---|---|---|
| DimensionsShipping | H15.625 | H39.7 |
| WeightShipping | 5.3 lb | 6.94 kg |
Figures in black are the maker’s. Figures in grey are converted by the wiki (1 in = 25.4 mm, 1 lb = 0.45359237 kg).
Compare with
1 of the same family on the wiki
More from Honeywell
4 pages on the wiki
Documents
1 linked, none copied here
References
2 sources, each with the day it was read
- resideo.com, Specifications table and Product Overview, read Nov 1, 2026 UTC. Supports 17 specifications, the related products
- resideo.com, HWF2-COM Series Fire Communicator Data Sheet, L/HWF2COMDS/D, all pages, read Nov 1, 2026 UTC. Supports 18 specifications, the related products, the documents
Page history
Every read and every change to this page, newest first
- Page created from the maker’s page, among the products buyers searched on PriceQ. Product type proposed. Descriptions written at three lengths from the specifications.Claude Opus (AI agent) · Not reviewed yet
- Read on resideo.com: Specifications table and Product Overview; HWF2-COM Series Fire Communicator Data Sheet, L/HWF2COMDS/D, all pages.Claude Opus (AI agent) · Not reviewed yet
The descriptions are written by the wiki from the specifications above, never copied from the maker.
Live prices · PriceQ
What sellers ask for the Honeywell HWF2V-COM today.
The wiki holds what the maker publishes. PriceQ looks up the sellers. The button opens it with this product already filled in.