Gigabit Cellular Router
Last updated Nov 1, 2026 · 2 entries in Page history
The Teltonika RUTX11 is a cellular router with 4G LTE Cat 6 up to 300 DL/ 50 UL Mbps, dual SIM, dual band Wi-Fi 5, Bluetooth LE and four Gigabit Ethernet ports.
- Part number or model
- RUTX11
- Type
- Cellular router
- Catalog number
- Not assigned yet

Timeline
Dates from the sources in References
- 28 August 2020Certified by Verizon
- 16 November 2022Railway and UL/CSA certifications announced
- 8 June 2023Certified for passenger trains in Europe
- 3 August 2026End of life announced for the RUTX series
- 03/02/2027End of ordering
- 03/08/2027End of production
- 03/08/2032End of support
Specifications
168 fields, as the sources state them
INDUSTRIAL CELLULAR ROUTER
Mobile
- Mobile module
- 4G LTE Cat 6 up to 300 DL/ 50 UL Mbps; 3G up to 42 DL/ 5.76 UL Mbps1
- 3GPP Release
- Release 121
- eSIM*
- Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans *Feature availability varies by order code1
- SIM switch*
- Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection *Feature availability varies by order code1
- Status
- IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC1
- Mobile: SMS
- SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP1
- USSD
- Supports sending and reading Unstructured Supplementary Service Data messages1
- Block/Allow list
- Operator block/allow list (by country or separate operators)1
- Multiple PDN
- Possibility to use different PDNs for multiple network access and services1
- Band management
- Band lock, Used band status display1
- SIM idle protection service
- Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked1
- SIM PIN code management
- SIM PIN code management enables setting, changing, or disabling the SIM card's PIN1
- APN
- Auto APN1
- Bridge
- Direct connection (bridge) between mobile ISP and device on LAN1
- Passthrough
- Router assigns its mobile WAN IP address to another device on LAN1
Wireless
- Wireless mode
- 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)1
- Wi-Fi security
- WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)1
- SSID/ESSID
- SSID stealth mode and access control based on MAC address1
- Wi-Fi users
- Up to 150 simultaneous connections1
- Wireless Connectivity Features
- Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)1
- Wireless MAC filter
- Allowlist, blocklist1
- Wireless QR code generator
- Once scanned, a user will automatically enter your network without needing to input login information1
- TravelMate
- Forward Wi-Fi hotspot landing page to a subsequent connected device1
Bluetooth
- Bluetooth 5.0
- Bluetooth low energy (LE) for short range communication1
Ethernet
Network
- Routing
- Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing1
- Network protocols
- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN1
- VoIP passthrough support
- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets1
- Connection monitoring
- Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection1
- Network: Firewall
- Port forward, traffic rules, custom rules, TTL target customisation1
- Firewall status page
- View all your Firewall statistics, rules, and rule counters1
- Port management
- View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on1
- Network topology
- Visual representation of your network, showing which devices are connected to which other devices1
- Hotspot
- Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes1
- DHCP
- Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards1
- QoS / Smart Queue Management (SQM)
- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e1
- DDNS
- Supported >77 service providers, others can be configured manually1
- DNS over HTTPS
- DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS1
- Network backup
- Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover1
- Load balancing
- Balance Internet traffic over multiple WAN connections1
- SSHFS
- Possibility to mount remote file system via SSH protocol1
- VRF support
- Initial virtual routing and forwarding (VRF) support1
- Traffic Management
- Real-time monitoring, wireless signal charts, traffic usage history1
Security
- 802.1x
- Port-based network access control client1
- Authentication
- Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator1
- Security: Firewall
- Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT641
- Attack prevention
- DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)1
- VLAN
- Port and tag-based VLAN separation1
- Mobile quota control
- Mobile data limit, customizable period, start time, warning limit, phone number1
- WEB filter
- Block list for blocking out unwanted websites, allow list for specifying allowed sites only1
- Access control
- Flexible access control of SSH, Web interface, CLI and Telnet1
- TPM*
- Identification and authentication module, TPM 2.0 standard *Feature availability varies by order code1
- Certificate Manager
- Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates1
VPN
- OpenVPN
- Multiple clients and a server can run simultaneously, 27 encryption methods1
- OpenVPN Encryption
- DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 2561
- IPsec
- XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)1
- GRE
- GRE tunnel, GRE tunnel over IPsec support1
- PPTP, L2TP
- Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support1
- Stunnel
- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code1
- DMVPN
- Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support1
- SSTP
- SSTP client instance support1
- ZeroTier
- ZeroTier VPN client support1
- WireGuard
- WireGuard VPN client and server support1
- Tinc
- Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.1
- Tailscale
- Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol1
BacNET
OPC UA
MODBUS
- MODBUS: Supported modes
- Server, Client1
- MODBUS: Supported connection types
- TCP, USB1
- Custom registers
- MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality1
- Supported data formats
- 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII1
Data to Server
MQTT Gateway
- Modbus MQTT Gateway
- Allows sending commands and receiving data from MODBUS Server through MQTT broker1
DNP3
DLMS/COSEM
API
- Teltonika Networks Web API (beta) support
- Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com1
Site Manager
- Site Manager: Supported modes
- Manager1
- Functionalities
- Centralized management of TAP access points and Teltonika's managed switches — including device pairing and grouping, FOTA updates, device status monitoring, automatic reboot scheduling with ping/wget health checks, wireless SSID configuration, and VLAN assignment across the site.1
Monitoring & Management
- Monitoring & Management: WEB UI
- HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status1
- Monitoring & Management: FOTA
- Firmware update from server, automatic notification1
- SSH
- SSH (v1, v2)1
- Monitoring & Management: SMS
- SMS status, SMS configuration1
- Call
- Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off1
- TR-069
- OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem1
- MQTT
- MQTT Broker, MQTT publisher1
- SNMP
- SNMP (v1, v2, v3), SNMP Trap, Brute force protection1
- JSON-RPC
- Management API over HTTP/HTTPS1
- Monitoring & Management: RMS
- Teltonika Remote Management System (RMS)1
IoT Platforms
- ThingWorx
- Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type1
- Cumulocity - Cloud of Things
- Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions1
- Azure IoT Hub
- Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs1
- AWS IoT Core
- Utility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality1
System Characteristics
Firmware/Configuration
- Firmware/Configuration: WEB UI
- Update FW from file, check FW on server, configuration profiles, configuration backup1
- Firmware/Configuration: FOTA
- Update FW1
- Firmware/Configuration: RMS
- Update FW/configuration for multiple devices at once1
- Keep settings
- Update FW without losing current configuration1
- Factory settings reset
- A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration1
FIRMWARE CUSTOMISATION
- Operating system
- RutOS (OpenWrt based Linux OS)1
- Supported languages
- Busybox shell, Lua, C, C++, and Python, Java in Package manager1
- Development tools
- SDK package with build environment provided1
- GPL customization
- You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs1
- Package Manager
- The Package Manager is a service used to install additional software on the device1
Location Tracking
USB
Input/Output
Power
- Connector
- 4-pin industrial DC power socket1
- Input voltage range
- 9 - 50 VDC, reverse polarity protection, voltage surge/transient protection 24 - 36 VDC for railway version of the code RUTX11 *2****1
- PoE (passive)
- Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC1
- Power consumption
- 16 W Max1
Physical Interfaces
- Ethernet
- 4 x RJ45 ports, 10/100/1000 Mbps1
- I/O’s
- 1 x Digital Input, 1 x Digital Output on 4-pin power connector1
- Status LEDs
- 4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G Wi-Fi1
- SIM
- 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders1
- Power
- 1 x 4-pin power connector1
- Antennas
- 2 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS1
- USB
- 1 x USB A port for external devices1
- Reset
- Reboot/User default reset/Factory reset button1
- Other
- 1 x Grounding screw1
Physical Specification
Operating Environment
Ordering
- STANDARD PACKAGE*
- Router RUTX11 18 W PSU 2x Mobile antennas (swivel, SMA male) 2x Wi-Fi antennas (swivel, RP-SMA male) 1x GNSS antenna (adhesive, SMA male, 3 m cable) 1x Bluetooth antenna (magnetic mount, RP-SMA male, 1.5 m cable) Ethernet cable (1.5 m) SIM Adapter kit QSG (Quick Start Guide) Packaging box *Standard package contents may differ based on standard order codes.2
- HS Code
- 8517622
- HTS
- 8517.62.002
- RUTX11 24****: Supported frequencies
- 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32¹ 4G (LTE-TDD): B38, B40, B41 3G: B1, B3, B5, B82
- RUTX11 34****: Supported frequencies
- 4G (LTE-FDD): B2, B4, B5, B7, B12, B13, B14, B25, B26, B29¹, B30, B66, B71 4G (LTE-TDD): B41, B482
- RUTX11 2*****: Supported frequencies
- 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32¹ 4G (LTE-TDD): B38, B40, B41 3G: B1, B3, B5, B82
- RUTX11 3*****: Supported frequencies
- 4G (LTE-FDD): B2, B4, B5, B7, B12, B13, B14, B25, B26, B29¹, B30, B66, B71 4G (LTE-TDD): B41, B482
- RUTX11 22****: Supported frequencies
- 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32¹ 4G (LTE-TDD): B38, B40, B41 3G: B1, B3, B5, B82
- RUTX11 32****: Supported frequencies
- 4G (LTE-FDD): B2, B4, B5, B7, B12, B13, B14, B25, B26, B29¹, B30, B66, B71 4G (LTE-TDD): B41, B482
- AVAILABLE VERSIONS
- 1 - LTE-FDD B29 and B32 support Rx only, and in 2×CA it is only for secondary component carrier 2 - Regional availability - excluding Russia, Belarus & Iran 3 - For more detailed information about certified carriers, visit our Wiki page2
History
Sources: teltonika-networks.com, Product page, feature boxes under the title, read Nov 1, 2026 UTC; teltonika-networks.com, Product page, "Ordering" tab, read Nov 1, 2026 UTC; teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC; teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC; teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC; teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC; teltonika-networks.com, EOL Products page, list of EOL products, row RUTX11, read Nov 1, 2026 UTC.
Size and weight
Inches and pounds, millimetres and kilograms
The product
| What | Inches and pounds | Millimetres and kilograms |
|---|---|---|
| Dimensions | W4.53 | W115 |
| Weight | 1.01 lbconverted | 456 g0.456 kgconverted |
Figures in black are the maker’s. Figures in grey are converted by the wiki (1 in = 25.4 mm, 1 lb = 0.45359237 kg).
Compare with
5 of the same family on the wiki
More from Teltonika
6 pages on the wiki
References
7 sources, each with the day it was read
- teltonika-networks.com, Product page, feature boxes under the title, read Nov 1, 2026 UTC. Supports 151 specifications, the related products
- teltonika-networks.com, Product page, "Ordering" tab, read Nov 1, 2026 UTC. Supports 10 specifications, the related products
- teltonika-networks.com, EOL Products page, list of EOL products, row RUTX11, read Nov 1, 2026 UTC. Supports 3 specifications
- teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC. Supports 1 specification
- teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC. Supports 1 specification
- teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC. Supports 1 specification
- teltonika-networks.com, Newsroom post, title and the date printed under it, read Nov 1, 2026 UTC. Supports 1 specification
Page history
Every read and every change to this page, newest first
- Page created from the maker’s page, among the products buyers searched on PriceQ. Product type proposed. Descriptions written at three lengths from the specifications.Claude Opus (AI agent) · Not reviewed yet
- Read on teltonika-networks.com: Product page, feature boxes under the title; Product page, "Ordering" tab; EOL Products page, list of EOL products, row RUTX11; Newsroom post, title and the date printed under it.Claude Opus (AI agent) · Not reviewed yet
The descriptions are written by the wiki from the specifications above, never copied from the maker.
Live prices · PriceQ
What sellers ask for the Teltonika RUTX11 today.
The wiki holds what the maker publishes. PriceQ looks up the sellers. The button opens it with this product already filled in.





